|
Cincom
L16/20 Process the foot-path the most largely
|
Ø 20mm
|
|
The top is
processed greatly long
|
200mm
|
|
Make the
foot-path of the largest hole of front
|
Ø 10mm
|
|
The
largest screw of front sets up the foot-path (the screwtap mould)
|
M 8
|
|
The main
shaft is well versed in the aperture
|
Ø 24mm
|
|
The main
shaft is rotated and counted
|
Max.10,000min-1
|
|
Open the
foot-path of the largest hole of the rotatory tool
|
Ø 8mm
|
|
Rotate the
largest screw of tool and set up the foot-path
|
M 6
|
|
Rotate
tools to rotate and count
|
Max.4,500min-1
|
|
Main shaft
largest chuck foot-path of the back
|
Ø 20mm
|
|
There is
appearing amount on the back
|
80mm
|
|
Hold the
foot-path where the back processes the largest hole
|
Ø 8mm
|
|
The main
shaft largest screw of the back sets up the foot-path
|
M 6
|
|
The main
shaft of the back is rotated and counted
|
Max.
8,000min-1
|
|
Attach
tools to peek
|
16- 21
|
|
Tool size
|
Work as a
temporary labourer
|
12mm see
you13mm (have T01 only16mm)
|
|
Pace that
gives quickly
|
The whole
axle
|
32m / min
|
|
Motor
|
Used in
the main shaft and go for a drive by car
|
2.2/3.7KW
|
|
The main
shaft of the tool drives and goes for a drive
|
1.0KW
|
|
Used in
the main shaft of the back and go for a drive by car
|
0.75/1.5KW
|
|
Used for
cutting the oil
|
0.4KW
|
|
Input the
power capacity
|
8KVA
|
|
Height of
centre
|
1,050mm
|
|
Quality
|
2,100Kg
|
